Ariens Gravely 924086-002400-ST1028 Snow Blower Thrower Parts
The Ariens Gravely 924086-002400 ST1028 is a robust gas-powered, two-stage snow thrower popular among homeowners and professionals alike. Featuring a 28-inch clearing width, this model was designed to tackle moderate to heavy snowfall. Its durable construction and reliable engine made it a sought-after choice for efficient snow removal during its production run.
The Ariens Gravely ST1028 (model 924086-002400) is a two-stage snow blower built for both residential and commercial snow removal. While the specific years of production need to be verified with Ariens/Gravely documentation and serial number records, it likely falls within the late 1990s to early 2000s. It's powered by a Tecumseh Snow King engine, typically around 10 HP, offering plenty of power to chew through heavy snow. An electric start was often an optional feature for added convenience. The two-stage design utilizes a robust auger system to break up the snow and then a high-speed impeller to throw it a considerable distance. This model boasts a 28-inch clearing width and an intake height capable of handling significant drifts. Expect throwing distances up to 40 feet, depending on snow conditions. The ST1028 features a wheel-drive system with multiple forward and reverse speeds, giving operators good control. The chute rotation is manually controlled, allowing the user to direct the snow stream. While headlight and heated grips were not standard features on all models in this generation, they were often available as add-ons. This snow blower excels in moderate to heavy snow conditions and is well-suited for driveways, sidewalks, and larger properties.
Specifications
| Engine | Tecumseh Snow King 10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 5 gallons |
| Weight | 250 lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s (verify with serial number) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear and damage. Replace any damaged components to ensure optimal snow removal performance.
- Shear Pin Replacement: Always keep spare shear pins on hand. Replace broken shear pins immediately to protect the auger gearbox from damage. Refer to your owner's manual for the correct shear pin type.
- Fuel Stabilization: Before storing the snow blower for the off-season, add fuel stabilizer to the gasoline tank to prevent fuel degradation and carburetor issues. Drain the carburetor bowl completely.
- Oil Changes: Perform regular oil changes according to the manufacturer's recommendations (typically annually or after a specified number of hours) to ensure proper engine lubrication and longevity. Check oil level before each use.
History & Background
The Ariens Gravely ST1028 model was introduced as a workhorse snow blower in the Ariens/Gravely lineup. While it's difficult to pinpoint exact redesign dates without specific model documentation, improvements were likely made to the engine and chute control over the years. The ST1028 contributed to Ariens' reputation for durable and reliable snow removal equipment.
Frequently Asked Questions
What engine is in the Ariens Gravely 924086-002400 ST1028?
The Ariens Gravely 924086-002400 ST1028 typically uses a Tecumseh Snow King engine. It's approximately 10 HP, and an electric start was often available as an optional feature.
What is the clearing width of the 924086-002400 ST1028?
The clearing width of the Ariens Gravely 924086-002400 ST1028 is 28 inches. The intake height is approximately 21 inches.
Is the 924086-002400 ST1028 a single-stage or two-stage snow blower?
The Ariens Gravely 924086-002400 ST1028 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow through the chute.
What are common parts needed for the 924086-002400 ST1028?
Common replacement parts for the Ariens Gravely 924086-002400 ST1028 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance items include oil and air filters (if equipped).
