Ariens Gravely 924082-039200-ST824 Snow Blower Thrower Parts
The Ariens Gravely 924082-039200 ST824 is a robust gas-powered two-stage snow blower that was popular for residential and light commercial snow removal during its production run. Featuring a 24-inch clearing width and powerful engine, this model was designed to handle moderate to heavy snowfall with ease. Find the snow blower parts you need to keep your 924082-039200 ST824 running smoothly for years to come.
The Ariens Gravely 924082-039200 ST824 is a two-stage snow blower built for reliable performance in demanding winter conditions. While the exact years of production can vary, this model was a staple of the Ariens Gravely lineup for a significant period. Typically, the ST824 is powered by a Tecumseh 8 HP engine (confirm exact HP on your unit). An electric start option might be available on some models. As a two-stage unit, it employs a robust auger to break up the snow and an impeller to discharge it forcefully through the chute. The 24-inch clearing width allows for efficient snow removal, while the intake height can handle drifts of a decent depth (around 20-21 inches). Depending on snow conditions, the throwing distance can reach up to 30-40 feet. The drive system is typically wheel-driven with multiple forward and reverse speeds, allowing for good maneuverability. The chute controls are usually manual, allowing you to direct the snow stream. While heated grips and headlights may not be standard on all models, these options provide added comfort and visibility. This snow blower excels in handling moderate to heavy snowfall on driveways, walkways, and other residential and commercial properties. It is well-suited for areas with significant snowfall amounts.
Specifications
| Engine | Tecumseh 8 HP (verify specific model) Electric Start: Possible (check your unit) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20-21 inches (approximate) |
| Throwing Distance | Up to 30-40 ft (estimated) |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Varies (check your unit's manual) gallons |
| Weight | ~200 lbs (approximate) |
| Years Produced | Specific Years Vary (check model history) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Keep spare shear pins on hand and replace them immediately if they break. Using the wrong type of shear pin can cause serious damage to your snowblower.
- Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues. Drain the fuel completely for long-term storage.
- Adjust Skid Shoes: Periodically adjust the skid shoes to ensure proper clearing height and prevent damage to the auger housing and the surface you are clearing.
History & Background
The Ariens Gravely ST824 series, including the 924082-039200, was a popular choice for its blend of power and maneuverability. Introduced as a mid-range option, it provided a good balance between clearing capacity and ease of use. Over its production lifespan, minor updates may have occurred to the engine or chassis components, but the core design remained relatively consistent, maintaining its reputation for dependability.
Frequently Asked Questions
What engine is in the Ariens Gravely 924082-039200 ST824?
The Ariens Gravely 924082-039200 ST824 typically used a Tecumseh 8 HP engine. However, it's crucial to verify the exact engine model on your specific unit.
What is the clearing width of the 924082-039200 ST824?
The clearing width of the 924082-039200 ST824 is 24 inches, and the intake height is approximately 20-21 inches.
Is the 924082-039200 ST824 a single-stage or two-stage snow blower?
The 924082-039200 ST824 is a two-stage snow blower. It uses an auger to collect and break up the snow, and an impeller to throw the snow out through the discharge chute.
What are common parts needed for the 924082-039200 ST824?
Commonly needed parts for the 924082-039200 ST824 include shear pins, belts (auger and drive belts), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters.
