Ariens Gravely 924081-ST824S Snow Blower Thrower Parts
The Ariens Gravely 924081 ST824S is a robust two-stage snow thrower, commonly used for both residential and light commercial snow removal during the late 1990s and early 2000s. Powered by a gasoline engine and featuring a 24-inch clearing width, the ST824S gained popularity for its reliability and ability to handle moderate to heavy snowfall. It's a dependable workhorse for tackling winter's challenges.
The Ariens Gravely 924081 ST824S snow thrower was a popular model produced by Ariens under the Gravely brand, known for its durability and performance in snow removal. While specific production years might vary slightly based on region and manufacturing schedules, it was predominantly available from the late 1990s into the early 2000s. This model is typically equipped with a Tecumseh 8 HP engine (though HP may vary slightly based on the exact year of manufacture). Many models featured an optional electric start for easier starting in cold weather. As a two-stage snow thrower, the ST824S utilizes an auger to break up and collect snow, then a separate impeller to throw the snow a considerable distance. Its 24-inch clearing width and approximately 20-inch intake height allow it to handle a significant amount of snow in each pass. Expect a throwing distance of up to 30-40 feet depending on snow conditions. The machine uses a wheel-drive system with multiple forward and reverse speeds, providing good traction and maneuverability. Manual chute controls are typical, allowing the operator to adjust the direction of the snow discharge. Many models included a headlight for improved visibility during early morning or evening snow removal. While heated grips were not standard on this model, they could be added as aftermarket accessories. The ST824S is ideally suited for handling moderate to heavy snowfall on driveways, sidewalks, and other residential or commercial areas.
Specifications
| Engine | Tecumseh 8 HP (approx.) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30-40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for any signs of wear, damage, or bending. Replace damaged parts promptly to maintain optimal snow throwing performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if they break. Shear pins protect the gearbox from damage if the auger encounters a hard object.
- Belt Tension Check: Inspect the drive and auger belts regularly for proper tension. Loose belts can slip and reduce the snow blower's effectiveness. Adjust or replace belts as needed.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline, especially before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting problems in the future.
History & Background
The Ariens Gravely ST824S (924081) was a staple in the Gravely snow blower lineup, offering a balance of power and maneuverability for homeowners and light commercial users. It represented a solid mid-range offering in a time when two-stage snow blowers were becoming increasingly popular. While there weren't significant redesigns during its production run, minor improvements were made to components over the years.
Frequently Asked Questions
What engine is in the Ariens Gravely 924081 ST824S?
The Ariens Gravely 924081 ST824S typically features a Tecumseh engine, around 8 HP. Some models have an optional electric start for easier cold-weather starting.
What is the clearing width of the 924081 ST824S?
The Ariens Gravely 924081 ST824S has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 924081 ST824S a single-stage or two-stage snow blower?
The Ariens Gravely 924081 ST824S is a two-stage snow blower. It utilizes an auger to gather and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the 924081 ST824S?
Common parts needed for the Ariens Gravely 924081 ST824S include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will ensure optimal performance.
