Ariens Gravely 924038 Snow Blower Thrower Parts
The Ariens Gravely 924038 is a robust gas-powered two-stage snow blower, a popular choice for both homeowners and commercial users during its production years. Known for its dependable performance and solid construction, this model typically featured a clearing width suitable for moderate to heavy snowfall. Its two-stage design allowed it to handle a variety of snow conditions effectively.
The Ariens Gravely 924038 represents a lineage of dependable snow removal equipment from Ariens Gravely. While the exact production years can vary depending on specific sub-models, these machines were generally available during the late 1980s and early to mid 1990s. They are powered by a Tecumseh engine, usually a 8 or 10 HP model. Many models included an electric start option for easier starting in cold weather. As a two-stage snow blower, the 924038 utilizes an auger to collect snow and an impeller to throw it through the discharge chute. Typically, this model boasts a 24-inch to 26-inch clearing width and an intake height capable of handling drifts up to 20 inches. Throwing distance varied depending on snow conditions, but could reach up to 30-40 feet. The drive system is wheel-driven, usually offering multiple forward and reverse speeds to adjust to different snow depths and terrain. Chute controls are typically manual, allowing the operator to direct the snow stream. While some variants might have had a headlight, heated grips were not commonly featured. The Ariens Gravely 924038 is well-suited for clearing driveways, sidewalks, and small to medium-sized parking lots in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200-250 lbs |
| Years Produced | Late 1980s - Mid 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn parts to maintain optimal snow throwing performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Inspect them before each use and replace any broken or damaged pins with the correct type and size.
- Change Oil and Use Fuel Stabilizer: Perform regular oil changes according to the manufacturer's recommendations. Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation.
History & Background
The Ariens Gravely 924038 snow blower was part of a generation of reliable and hardworking machines known for their durability and effectiveness. These models offered a balance of power and maneuverability, making them a popular choice. While there might have been slight variations during its production run, the core design and functionality remained consistent, solidifying its place in the snow blower market.
Frequently Asked Questions
What engine is in the Ariens Gravely 924038?
The Ariens Gravely 924038 typically utilizes a Tecumseh engine, ranging from 8 to 10 horsepower. Many models offered an optional electric start for added convenience.
What is the clearing width of the 924038?
The Ariens Gravely 924038 typically has a clearing width between 24 and 26 inches, and an intake height of approximately 20 inches.
Is the 924038 a single-stage or two-stage snow blower?
The Ariens Gravely 924038 is a two-stage snow blower. It uses an auger to collect snow and then an impeller to discharge it through the chute, allowing it to handle heavier snow and ice effectively.
What are common parts needed for the 924038?
Commonly needed parts for the Ariens Gravely 924038 include shear pins, drive belts, auger belts, scraper bars, skid shoes, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will ensure optimal performance.
