Ariens Gravely 924027-ST8 Snow Blower Thrower Parts
The Ariens Gravely 924027 ST8 is a robust gas-powered two-stage snow thrower likely manufactured in the late 1990s and early 2000s. With a clearing width of 24-26 inches (verify), this model was popular for its powerful engine and ability to handle moderate to heavy snowfall in residential and commercial settings. It was known for its durability and reliable performance, making it a staple for homeowners and snow removal professionals alike.
The Ariens Gravely 924027 ST8 is a two-stage snow blower designed for efficient snow removal. Though specific production years vary, it was primarily produced around the late 1990s to early 2000s. It typically features a Tecumseh or Briggs & Stratton engine, generally in the 8 HP range (verify). Some models may have offered an electric start option for added convenience. The two-stage design employs a robust auger system to break up the snow and then an impeller to throw the snow further. This model boasts a clearing width of approximately 24-26 inches (verify) and an intake height of around 20-21 inches (verify), making it suitable for handling deeper snowdrifts. Expect a throwing distance of up to 30-40 feet (verify), depending on snow conditions. The drive system is wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. Chute controls are typically manual, allowing users to adjust the direction and trajectory of the snow discharge. Many models also feature a headlight for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature on this model (verify), the powerful engine and robust construction made it a reliable choice for tackling challenging snow conditions. It's well-suited for paved driveways, walkways, and smaller commercial properties.
Specifications
| Engine | Tecumseh/Briggs & Stratton 8 HP (Verify) Electric Start (Verify) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches (Verify) |
| Intake Height | 20-21 inches (Verify) |
| Throwing Distance | Up to 30-40 ft (Verify) |
| Drive System | Wheel - 5 Forward/2 Reverse (Verify) |
| Fuel Tank | Unknown (Verify) gallons |
| Weight | Unknown (Verify) lbs |
| Years Produced | Late 1990s - Early 2000s (Verify) |
Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for signs of wear or damage. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
- Fuel System Care: Use fresh fuel and add fuel stabilizer, especially during off-season storage, to prevent fuel degradation and carburetor issues.
- Oil Changes: Perform regular oil changes according to the engine manufacturer's recommendations to ensure proper lubrication and extend engine life.
History & Background
The Ariens Gravely 924027 ST8 was a popular model known for its blend of power and maneuverability. Introduced in the late 1990s, it represented a solid offering in the two-stage snow blower category, appealing to both residential and commercial users seeking a reliable machine. While not a revolutionary design, its robust construction and dependable engine contributed to its longevity and sustained popularity.
Frequently Asked Questions
What engine is in the Ariens Gravely 924027 ST8?
The Ariens Gravely 924027 ST8 typically uses a Tecumseh or Briggs & Stratton engine, generally in the 8 HP range. Some models may feature an electric start option.
What is the clearing width of the 924027 ST8?
The 924027 ST8 offers a clearing width of approximately 24-26 inches and an intake height of around 20-21 inches. (Verify Measurements)
Is the 924027 ST8 a single-stage or two-stage snow blower?
The 924027 ST8 is a two-stage snow blower. It utilizes an auger to break up the snow and an impeller to throw the snow away from the cleared area.
What are common parts needed for the 924027 ST8?
Commonly needed parts for the 924027 ST8 include shear pins, drive belts, auger belts, scraper bars, skid shoes, spark plugs, fuel filters, and replacement auger paddles.
