Ariens Gravely 924020-ST824 Snow Blower Thrower Parts
The Ariens Gravely 924020 ST824 is a robust two-stage snow blower, commonly known as the ST824, manufactured by Ariens under the Gravely brand. This gas-powered model, with its 24-inch clearing width, was a popular choice for homeowners and light commercial use due to its balance of power and maneuverability. It was known for its reliability in handling moderate to heavy snowfall.
The Ariens Gravely 924020 ST824, part of the ST824 series, was a popular model during its production run. While specific years of production can vary, it was typically found in the late 1990s and early 2000s model years. It's powered by a Tecumseh engine, commonly a 8 HP engine with a displacement around 250cc, although variations may exist. An electric start option may or may not have been available depending on the sub-model. As a two-stage snow blower, the 924020 utilizes an auger to break up the snow and then an impeller to throw it. This model features a 24-inch clearing width and an intake height of approximately 20 inches, allowing it to handle substantial snowfalls. Throwing distance could reach up to 30-40 feet depending on snow conditions. The drive system is wheel-driven with multiple forward and reverse speeds, providing good traction. Chute controls are typically manual, allowing for directional snow throwing. Some models may have a headlight. The ST824 series, including the 924020, is well-suited for residential driveways, walkways, and smaller commercial properties experiencing moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 8 HP (Approx. 250cc) Electric Start (Some Models) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn parts to maintain optimal performance.
- Shear Pins: Always have spare shear pins on hand. Replace them immediately if the auger stops suddenly, indicating a shear pin has broken to protect the drivetrain.
- Oil Changes and Fuel Stabilizer: Change the engine oil at recommended intervals (typically once a year). Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you are clearing (paved vs. gravel). Proper adjustment prevents damage to the snow blower and the surface beneath.
History & Background
The Ariens Gravely 924020 ST824 was introduced as a reliable and affordable option in the two-stage snow blower market. As part of the ST824 series, it offered a balance of power and maneuverability for homeowners. While there weren't major redesigns during its production, minor component updates may have occurred, solidifying its place as a dependable choice for snow removal.
Frequently Asked Questions
What engine is in the Ariens Gravely 924020 ST824?
The Ariens Gravely 924020 ST824 is typically equipped with a Tecumseh engine, commonly around 8 horsepower and approximately 250cc. Some models may have featured an electric start option.
What is the clearing width of the 924020 ST824?
The Ariens Gravely 924020 ST824 has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 924020 ST824 a single-stage or two-stage snow blower?
The Ariens Gravely 924020 ST824 is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller to throw the snow away from the clearing path.
What are common parts needed for the 924020 ST824?
Common parts needed for the 924020 ST824 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
