Ariens Gravely 924013-ST832 Snow Blower Thrower Parts
The Ariens Gravely 924013 ST832 is a robust gas-powered, two-stage snow blower popular for its reliable performance in demanding winter conditions. This model, likely manufactured in the late 1980s and early 1990s, features a 32-inch clearing width, making it suitable for both residential driveways and commercial properties with moderate snow accumulation. It was known for its durable construction and ability to handle heavy, wet snow.
The Ariens Gravely 924013 ST832 is a classic two-stage snow blower designed for efficient snow removal. While exact production years require further verification based on serial number, it was likely manufactured in the late 1980s and early 1990s. This model typically featured a Tecumseh engine, ranging from 8 to 10 horsepower. Some variants may have offered an electric start option for convenient starting in cold weather. Being a two-stage unit, it utilizes a robust auger to break up and gather snow, followed by a high-speed impeller that throws the snow through the discharge chute. The 32-inch clearing width allows for quicker snow removal compared to smaller models, while the intake height can handle drifts up to 20 inches deep. The throwing distance is typically around 30-40 feet, depending on snow conditions. The 924013 ST832 usually features a wheel drive system with multiple forward and reverse speeds, offering good maneuverability. Chute rotation is manually controlled. These models were built without headlights or heated grips. It's best suited for areas with moderate to heavy snowfall, handling everything from light, fluffy powder to wet, heavy slush. The durable construction makes it a favorite for both homeowners and commercial users.
Specifications
| Engine | Tecumseh 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 32 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 250 lbs |
| Years Produced | Late 1980s - Early 1990s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if they break to protect the auger gearbox from damage when encountering hard objects.
- Belt Tension Check: Ensure proper belt tension on the auger and drive belts. Loose belts can cause slippage and reduced performance. Adjust or replace belts as needed.
- Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Ariens Gravely 924013 ST832 was introduced as a mid-size two-stage snow blower, offering a balance of power and maneuverability. While not a revolutionary design, it represented Ariens Gravely's commitment to building dependable and durable snow removal equipment. Its popularity solidified their position as a leading manufacturer in the snow blower market during that era.
Frequently Asked Questions
What engine is in the Ariens Gravely 924013 ST832?
The Ariens Gravely 924013 ST832 typically uses a Tecumseh engine, ranging from 8 to 10 horsepower. Some models may have an optional electric start.
What is the clearing width of the 924013 ST832?
The Ariens Gravely 924013 ST832 has a clearing width of 32 inches and an intake height of approximately 20 inches.
Is the 924013 ST832 a single-stage or two-stage snow blower?
The Ariens Gravely 924013 ST832 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 924013 ST832?
Common parts needed for the Ariens Gravely 924013 ST832 include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters.
