Ariens Gravely 921313-POWER-BRUSH-28 Snow Blower Thrower Parts
The Ariens Gravely 921313 POWER BRUSH 28 is a robust snow blower, likely manufactured in the early to mid 2000s. Powered by a gas engine and featuring a 28-inch clearing width, this two-stage model was a popular choice for homeowners and light commercial use due to its reliability and effective snow removal capabilities. Its Power Brush feature gave it a distinct advantage in clearing snow down to the pavement.
The Ariens Gravely 921313 POWER BRUSH 28 snow thrower was designed for tackling moderate to heavy snowfall on driveways and walkways. While specific production years are harder to pin down without a serial number decoder, it was likely produced in the early to mid 2000s. It typically featured a Tecumseh or Briggs & Stratton engine, delivering around 8-10 HP. Some models may have had an optional electric start. The two-stage design uses an auger to break up the snow and then an impeller to throw it further. The 28-inch clearing width allows for efficient snow removal, and the intake height is typically around 20-21 inches. Throwing distance could reach up to 40 feet depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds for maneuverability. The chute controls are likely manual, allowing the operator to adjust the direction of the snow stream. A headlight is commonly included for improved visibility in low-light conditions. While heated grips were not standard, this model was well-suited for areas experiencing moderate to heavy snowfall, making it a reliable option for both homeowners and small businesses. A key feature was the 'Power Brush' which aggressively cleared snow and left a very clean surface.
Specifications
| Engine | Tecumseh or Briggs & Stratton 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 200-250 lbs (approximate) |
| Years Produced | Early to Mid 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check for damage or wear and tear on the auger blades and impeller. Replace damaged parts promptly.
- Check and Replace Shear Pins: Inspect shear pins before each use and replace any broken pins to prevent damage to the auger gearbox. Use only manufacturer-recommended shear pins.
- Change Engine Oil Annually: Replace the engine oil annually, or more frequently if used extensively, to ensure optimal engine performance and longevity. Use the recommended oil type.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Ariens Gravely 921313 POWER BRUSH 28 was part of a broader line of snow blowers designed for both residential and commercial applications. Its introduction aimed to provide a reliable and efficient snow removal solution with a wider clearing path and two-stage design. The Power Brush feature set it apart in terms of clearing ability.
Frequently Asked Questions
What engine is in the Ariens Gravely 921313 POWER BRUSH 28?
The Ariens Gravely 921313 POWER BRUSH 28 is typically equipped with either a Tecumseh or Briggs & Stratton gas engine, ranging from 8 to 10 horsepower. Some models may have included an electric start option for easier starting in cold weather.
What is the clearing width of the 921313 POWER BRUSH 28?
The Ariens Gravely 921313 POWER BRUSH 28 has a clearing width of 28 inches, allowing it to efficiently clear a wide path with each pass. The intake height is approximately 20-21 inches.
Is the 921313 POWER BRUSH 28 a single-stage or two-stage snow blower?
The Ariens Gravely 921313 POWER BRUSH 28 is a two-stage snow blower. This means it uses an auger to gather and break up the snow, and then an impeller to throw the snow out of the discharge chute. This design allows it to handle heavier snow and throw it farther compared to single-stage models.
What are common parts needed for the 921313 POWER BRUSH 28?
Common replacement parts for the Ariens Gravely 921313 POWER BRUSH 28 include shear pins (for the auger), drive belts, scraper bar, skid shoes, spark plugs, fuel filters, and auger paddles/blades. Regular maintenance and timely replacement of these parts can help ensure the snow blower operates efficiently and reliably.
