Ariens Gravely 921300-ST824E Snow Blower Thrower Parts
The Ariens Gravely 921300 ST824E is a robust two-stage snow blower known for its reliability. Produced for several years, this gas-powered machine boasts a 24-inch clearing width, making it a popular choice for homeowners and property managers dealing with moderate to heavy snowfall. Its powerful engine and durable construction ensure efficient snow removal season after season.
The Ariens Gravely 921300 ST824E, often referred to as the ST824E, was designed to provide dependable snow clearing performance. While exact production years may vary depending on specific configurations and dealer inventory, it was a popular model in the late 1990s and early 2000s. Typically equipped with a Tecumseh 8 HP engine, some models offered an optional electric start for ease of use in cold weather. As a two-stage snow blower, it utilizes a robust auger system to break up snow and an impeller to throw it a considerable distance. The 24-inch clearing width and approximately 20-inch intake height allow it to handle significant snowfalls. The throwing distance could reach up to 30-40 feet depending on snow conditions. The ST824E features a wheel drive system with multiple forward and reverse speeds, providing excellent traction and control. The chute is typically manually controlled, allowing for precise snow placement. While not always standard, some models might have included a headlight for improved visibility during early morning or late evening snow removal. This snow blower is ideally suited for homeowners with medium to large driveways and sidewalks, as well as for light commercial use in areas with moderate to heavy snow accumulation.
Specifications
| Engine | Tecumseh 8 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn or damaged parts to maintain optimal performance.
- Replace Shear Pins: Always have spare shear pins on hand. Replace them immediately if the auger stops abruptly due to hitting a hard object.
- Oil Change and Fuel Stabilizer: Change the engine oil annually and add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you're clearing. Raise them for gravel driveways and lower them for paved surfaces to protect the scraper bar and prevent damage to the driveway.
History & Background
The Ariens Gravely ST824E (921300) was introduced as a dependable mid-range two-stage snow blower. While there weren't major redesigns during its production run, minor improvements to the engine and chute controls may have been implemented over the years. It gained popularity for its balance of power, clearing capacity, and affordability, making it a staple in many households for winter snow removal.
Frequently Asked Questions
What engine is in the Ariens Gravely 921300 ST824E?
The Ariens Gravely 921300 ST824E typically features a Tecumseh 8 HP engine. Some models were available with an optional electric start.
What is the clearing width of the 921300 ST824E?
The Ariens Gravely 921300 ST824E has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 921300 ST824E a single-stage or two-stage snow blower?
The Ariens Gravely 921300 ST824E is a two-stage snow blower. It uses an auger to collect and break up the snow and an impeller to throw the snow away from the clearing area.
What are common parts needed for the 921300 ST824E?
Commonly needed parts for the Ariens Gravely 921300 ST824E include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
