Ariens Gravely 920404-SNO-TEK-24 Snow Blower Thrower Parts
The Ariens Gravely 920404 SNO-TEK 24 is a popular gas-powered, two-stage snow blower known for its reliability and ease of use. Featuring a 24-inch clearing width, this model was primarily designed for residential use, offering a balance of power and maneuverability for clearing driveways and walkways. It was manufactured starting in the early 2000s and features a dependable engine.
The Ariens Gravely 920404 SNO-TEK 24 snow blower was introduced as a value-priced, high-quality option in the Ariens/Gravely lineup. These machines were produced in the early-to-mid 2000s. The 920404 SNO-TEK 24 is powered by a reliable LCT (Liquid Combustion Technology) or Briggs & Stratton gas engine, typically in the 5.5 to 6.5 HP range or equivalent CC rating. Some models were available with an electric start option for convenient starting in cold weather. This is a two-stage snow blower, employing an auger to break up snow and an impeller to throw it through the discharge chute. The 24-inch clearing width and approximately 20-inch intake height allow it to handle moderate snowfalls with ease. Depending on snow conditions, it can throw snow up to 30-35 feet. The drive system is wheel-driven, offering multiple forward and reverse speeds for controlled operation. Chute controls are typically manual, allowing the operator to adjust the direction of the snow stream. While not all models have a headlight or heated grips, this machine is well suited for homeowners needing a dependable and efficient snow removal solution for average snowfalls on driveways and walkways.
Specifications
| Engine | LCT or Briggs & Stratton 5.5-6.5 HP Gas, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 160 lbs |
| Years Produced | Early to Mid 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for damage, wear, and ensure they rotate freely. Replace any damaged components immediately.
- Replace shear pins promptly: Use only the correct shear pins specified for your SNO-TEK 24 model. Using incorrect pins can damage the auger gearbox.
- Perform regular oil changes: Follow the engine manufacturer's recommendations for oil type and change intervals to ensure optimal engine performance and longevity.
- Use fuel stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel degradation and keep the engine running smoothly.
History & Background
The Ariens Gravely 920404 SNO-TEK 24 snow blower was introduced to provide a more affordable, but still reliable, option compared to Ariens' premium models. While it may have seen minor updates throughout its production run, the core design remained consistent. Its success demonstrated the demand for durable and efficient two-stage snow blowers in the residential market.
Frequently Asked Questions
What engine is in the Ariens Gravely 920404 SNO-TEK 24?
The 920404 SNO-TEK 24 is typically equipped with an LCT (Liquid Combustion Technology) or Briggs & Stratton gas engine, ranging from 5.5 to 6.5 HP, depending on the specific year and model. Some models also offered an electric start option.
What is the clearing width of the 920404 SNO-TEK 24?
The Ariens Gravely 920404 SNO-TEK 24 has a clearing width of 24 inches and an intake height of approximately 20 inches, allowing it to handle moderate snowfalls effectively.
Is the 920404 SNO-TEK 24 a single-stage or two-stage snow blower?
The 920404 SNO-TEK 24 is a two-stage snow blower. It utilizes an auger to gather and break up the snow, then an impeller to powerfully throw the snow through the discharge chute, allowing it to handle deeper snow and throw it farther compared to single-stage models.
What are common parts needed for the 920404 SNO-TEK 24?
Common wear parts for the 920404 SNO-TEK 24 include shear pins, belts (auger and drive), auger paddles (if equipped), the scraper bar, skid shoes, spark plugs, and fuel filters. Regularly replacing these parts will keep your snow blower running smoothly.
