Ariens Gravely 920315-SNO-TEK-22 Snow Blower Thrower Parts
The Ariens Gravely 920315 SNO-TEK 22 snow blower, a popular choice for homeowners, was likely manufactured in the early 2000s. This gas-powered, two-stage snow thrower features a 22-inch clearing width, making it ideal for moderate snowfalls on driveways and sidewalks. Its robust design and reliable performance made it a trusted machine for residential snow removal.
The Ariens Gravely 920315 SNO-TEK 22 is a two-stage snow blower designed for efficient snow removal. While specific production years are difficult to pinpoint without official documentation, it's likely this model was produced in the early 2000s. It is powered by a Tecumseh engine, producing approximately 5 HP (specific cc rating may vary). An electric start option may or may not have been available depending on the specific sub-model. As a two-stage machine, it utilizes an auger to break up and collect snow, then an impeller to throw the snow through the discharge chute. The 22-inch clearing width and approximately 12-inch intake height allow it to handle moderate snow depths. Throwing distance can reach up to 30 feet depending on snow conditions. It features a wheel-drive system with multiple forward and reverse speeds for maneuverability. Chute control is manual, allowing the operator to adjust the direction of the snow stream. A headlight may or may not have been standard on all models. The SNO-TEK 22 is best suited for homeowners dealing with moderate snowfalls on driveways, walkways, and patios. It's a reliable option for those needing a step up from a single-stage blower.
Specifications
| Engine | Tecumseh 5 HP (approximate) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 22 inches |
| Intake Height | 12 inches (approximate) |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Early 2000s (Estimate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Inspect shear pins before each use and replace any that are broken or sheared. Keep extra shear pins on hand.
- Oil Changes and Fuel Stabilizer: Perform regular oil changes according to the engine manufacturer's recommendations. Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation.
- Adjust Skid Shoes: Adjust the skid shoes to match the surface you're clearing. Raise the skid shoes for gravel surfaces to prevent damage to the blower and the surface.
History & Background
The Ariens Gravely 920315 SNO-TEK 22 was part of the SNO-TEK line, known for providing reliable performance at a more accessible price point than premium Ariens models. It represented a popular option for homeowners seeking a durable and effective two-stage snow blower. While specific dates of introduction or major redesigns are not readily available, it held a significant place in the residential snow removal market during its production run.
Frequently Asked Questions
What engine is in the Ariens Gravely 920315 SNO-TEK 22?
The Ariens Gravely 920315 SNO-TEK 22 is equipped with a Tecumseh engine, producing approximately 5 HP. An electric start may have been available as an option, depending on the specific model variation.
What is the clearing width of the 920315 SNO-TEK 22?
The clearing width of the Ariens Gravely 920315 SNO-TEK 22 is 22 inches. The intake height is approximately 12 inches.
Is the 920315 SNO-TEK 22 a single-stage or two-stage snow blower?
The Ariens Gravely 920315 SNO-TEK 22 is a two-stage snow blower. It uses an auger to break up and collect snow, and then an impeller to forcefully discharge the snow through the chute.
What are common parts needed for the 920315 SNO-TEK 22?
Common replacement parts for the Ariens Gravely 920315 SNO-TEK 22 include shear pins, drive belts, auger belts, auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
