Ariens Gravely 920308-COMPACT-26 Snow Blower Thrower Parts
The Ariens Gravely 920308 COMPACT 26 snow blower, likely manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage machine known for its reliable performance. Featuring a 26-inch clearing width, it was a popular choice for homeowners needing a capable snow thrower for medium-sized driveways and walkways. Its robust build and efficient snow throwing made it a trusted tool for winter snow removal.
The Ariens Gravely 920308 COMPACT 26 is a two-stage snow blower designed for residential use. While the exact production years are difficult to pin down precisely without serial number ranges, this model was common in the late 1990s and early 2000s. It's powered by a Tecumseh engine, likely in the 5-6 HP range. Some models may have offered an electric start option for easier starting in cold weather. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it through the chute. The 26-inch clearing width allows for efficient snow removal on sidewalks and driveways. Intake height is typically around 20-21 inches. Throwing distance is estimated up to 30-35 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds. Chute control is manual, typically with a crank lever to adjust the direction of the snow stream. Many models included a headlight for improved visibility in low-light conditions. Heated grips were not a standard feature on this model. The 920308 is best suited for moderate to heavy snowfalls on paved surfaces.
Specifications
| Engine | Tecumseh 5-6 HP (Estimated) Electric Start (Some Models) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20-21 inches (Estimated) |
| Throwing Distance | Up to 35 ft (Estimated) |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons (Estimated) |
| Weight | Approximately 200 lbs (Estimated) |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect the Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to break when the auger encounters a hard object. Keep extra shear pins on hand and replace them immediately when broken to prevent damage to the auger gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting problems.
- Check Skid Shoe Adjustment: Adjust the skid shoes to the correct height for your surface. This will prevent damage to your driveway or sidewalk and ensure efficient snow removal.
History & Background
The Ariens Gravely 920308 COMPACT 26 was a popular model in the Ariens/Gravely lineup, offering a balance of power and maneuverability for homeowners. While not a revolutionary design, it represented a solid, reliable snow removal solution. Minor updates were likely made during its production run, but no major redesigns are known.
Frequently Asked Questions
What engine is in the Ariens Gravely 920308 COMPACT 26?
The Ariens Gravely 920308 COMPACT 26 is typically powered by a Tecumseh engine in the 5 to 6 horsepower range. Some models may have included an electric start option for convenient starting in cold weather.
What is the clearing width of the 920308 COMPACT 26?
The Ariens Gravely 920308 COMPACT 26 has a clearing width of 26 inches and an estimated intake height of 20-21 inches, allowing it to handle a significant amount of snow in each pass.
Is the 920308 COMPACT 26 a single-stage or two-stage snow blower?
The Ariens Gravely 920308 COMPACT 26 is a two-stage snow blower. This means it uses an auger to break up the snow and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 920308 COMPACT 26?
Common wear parts for the Ariens Gravely 920308 COMPACT 26 include shear pins, belts (auger and drive), auger paddles (if equipped), the scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts can extend the life of your snow blower.
