Briggs & Stratton Spark Plug: Part Numbers by Engine
Finding the right Briggs & Stratton spark plug can be tricky. This guide provides spark plug part numbers based on engine models, helping you keep your lawn mower running smoothly. Plus, safety tips and maintenance advice!
Introduction to Briggs & Stratton Spark Plugs
A properly functioning briggs and stratton spark plug is essential for the efficient operation of your lawn mower, snow blower, or any other equipment powered by a Briggs & Stratton engine. A faulty spark plug can cause hard starting, misfires, reduced power, and poor fuel economy. Replacing your spark plug at regular intervals, typically every season or 100 hours of use (check your engine's owner's manual for specific recommendations), ensures optimal engine performance and longevity.
Recommended Parts for This Guide
3 parts we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
This guide will help you identify the correct spark plug for your specific Briggs & Stratton engine model. We'll also cover essential safety precautions and some general maintenance tips.
Identifying Your Briggs & Stratton Engine Model
Before you can find the correct spark plug, you'll need to locate your engine's model, type, and code numbers. These numbers are usually stamped directly onto the engine. Common locations include:
- On the valve cover
- Above the muffler
- Near the starter
The model number is typically a six or seven digit number, followed by a type number (usually four digits), and then a code number (eight or nine digits). It looks something like this: 123456-7890-12345678. Write these numbers down, as they'll be crucial for finding the correct parts.
Knowing the model number also helps when looking for other maintenance parts, like a briggs and stratton air filter or a briggs and stratton oil filter.
Finding the Correct Spark Plug
While specific spark plug recommendations can vary based on the exact engine model, here's a general guide to some common Briggs & Stratton spark plug part numbers and the types of engines they typically fit. Always verify the exact fitment with your engine's owner's manual or a parts lookup tool before purchasing.
Common Briggs & Stratton Spark Plug Part Numbers
- BS-491055S (Champion RJ19LM): A very common plug used in many smaller Briggs & Stratton engines, including those found on walk-behind mowers and some older riding mowers.
- BS-796112 (Champion RC12YC): Frequently used in Intek and other mid-sized engines found on riding mowers, including those made by John Deere, Craftsman, and Cub Cadet.
- BS-992304 (Champion RC14YC): Often found in larger engines, including those used in some zero-turn mowers and snow blowers. This is sometimes used on engines powering equipment from Husqvarna, Toro, and Ariens.
- BS-594056 (Champion RJ19LM): Another common spark plug for smaller engines and walk-behind mowers.
Note: Briggs & Stratton spark plugs are often cross-compatible with Champion spark plugs. The Champion equivalents are listed above. You can also find equivalent spark plugs from other manufacturers like NGK.
Using a Parts Lookup Tool
The most accurate way to find the correct spark plug is to use a parts lookup tool on a website like Madison Tractor. Enter your engine's model, type, and code numbers, and the tool will display a list of compatible parts, including spark plugs. These tools also help you locate John Deere air filters or Kohler oil filters, too.
Spark Plug Maintenance and Replacement
Replacing a spark plug is a relatively simple task that can be performed with basic tools. Here's a step-by-step guide:
- Safety First: Disconnect the spark plug wire from the spark plug. Allow the engine to cool completely before proceeding. Never work on a hot engine.
- Clean the Area: Use compressed air or a brush to clean the area around the spark plug. This prevents debris from entering the cylinder when you remove the plug.
- Remove the Old Spark Plug: Use a spark plug socket (typically 13/16" or 5/8") to loosen and remove the old spark plug. Turn the socket counterclockwise.
- Inspect the Old Spark Plug: Examine the old spark plug for signs of wear or damage. A fouled or damaged spark plug can indicate other engine problems.
- Gap the New Spark Plug: Use a spark plug gap tool to ensure the new spark plug has the correct gap. The correct gap specification is usually listed in your engine's owner's manual or on a sticker near the engine.
- Install the New Spark Plug: Carefully thread the new spark plug into the cylinder head by hand. This prevents cross-threading.
- Torque the Spark Plug: Use a torque wrench to tighten the spark plug to the manufacturer's specified torque. If you don't have a torque wrench, tighten the spark plug snugly, but do not overtighten.
- Reconnect the spark plug wire: Reconnect the spark plug wire to the new spark plug.
Spark Plug Inspection
Periodically inspect your spark plug to diagnose engine problems. Here's what to look for:
- Normal Condition: A light tan or gray deposit on the electrode indicates normal engine operation.
- Fouled (Black and Sooty): Indicates a rich fuel mixture, a clogged air filter (like a Craftsman mower air filter), or a weak ignition system.
- Oily: Indicates oil is leaking into the combustion chamber, possibly due to worn piston rings or valve seals.
- Damaged or Worn: Replace immediately.
Safety Precautions
- Always disconnect the spark plug wire before performing any maintenance on the engine.
- Allow the engine to cool completely before working on it.
- Wear safety glasses to protect your eyes from debris.
- Work in a well-ventilated area to avoid inhaling fumes.
- Consult your engine's owner's manual for specific safety instructions.
Brands We Serve
At Madison Tractor Company, we carry a wide selection of parts for various brands that use Briggs & Stratton engines. This includes, but isn't limited to:
- John Deere
- Craftsman
- Cub Cadet
- Husqvarna
- Toro
- Ariens
- Murray
- Hustler
- Scag
- Exmark
- Ferris
- Snapper
- Simplicity
- Dixie Chopper
We also stock other common parts like belts, blades, spindles, pulleys, filters, shear pins, and bearings.
Shop Briggs & Stratton Parts at Madison Tractor
Finding the right briggs and stratton spark plug, Kawasaki engine air filter, or any other replacement part for your outdoor power equipment is easy at Madison Tractor Company. We offer a wide selection of high-quality parts, competitive prices, and expert customer service. Use our parts lookup tool or contact us today to find the parts you need to keep your equipment running smoothly. Shop with us and experience the Madison Tractor difference! You can also use our AI-Powered Part Finder to search for parts by your specific make and model.
Part of our comprehensive guide
Small Engine Filter Guide: Air, Oil & Fuel Filters by Engine Brand










