CS64414 - Driveline, Economy Rotary Cutter

CS64414 - Driveline, Economy Rotary Cutter
$215.07

Availability: In stock

Details

100 Series Rotary Cutter Driveline Assembly. Driveline minimum C-to-C is 44" (1120 mm), maximum C-to-C length is 67" (1710 mm), total collapsed length is 52" (1320 mm). Tractor end: 1-3/8" 6 Spline, Implement end: 1-3/8" round bar with 1/2" pin hole. Rated as a category 4 HD (64 hp), size 6. Fits Maletti Rotary Tiller.
•  It may be necessary to cut this driveline to length. Verify the length by ensuring that sufficient overlap of the drive tubes exists in all working positions without the possibility of bottoming out.
•  Use a grade 2 shear bolt 1/2" x 3 1/2". The use of a harder grade bolt will void the warranty.
Size
6
Total Collapsed Length
1320 mm/ 52"
Tractor
1 3/8" -6
Implement
1 3/8" RB 1/2" PH
C to C Min
1120 mm/ 44"
C to C Max
1710 mm/ 67"
Type
7 ft. Lift / 3-pt. Hitch
Series
100
Category
4 HD (64HP)



Cross References:

Replaces:
CS5133
MISCELLANEOUS
PM14006652
JOHN DEERE
14006652
DRIVE-LINE
Crossed From:
W14006652DS
CASE/IH



Fits the following makes and models:

Maletti ROTOR TILLER: KZ100 SERIES
Bondioli & Pavesi 100 Series: Size 6

Additional Information

shipping_weight 35.0000