HSE-1002-0M11 - Direct/Belt Driven Hot Pressure Washer, Electric

Share

< hr>
PSI - 3000
GPM - 3.0
HP - 9.0
Volt/Phase/Amp 120V/1PH/15.0
< hr>
This compact, portable, hot water pressure washer offers quiet operation and is suitable for a wide variety of industrial applications.

- Totally enclosed fan-cooled electric motor with manual thermal overload protection

- Direct drive triplex piston pump with ceramic plungers and forged brass manifold

- Thermal relief valve

- Stainless-steel and brass unloader valve

- High pressure detergent injection (low pressure on HSE-1002-0M11)

- Complete system diagnostic board

- Solid state electronic ignition

- Float tank (N/A on HSE-1002-0M11)

- Pressure and high limit safety controls

- No. 1 or No. 2 diesel or kerosene fired burner

- Polyethylene burner fuel tank

- Temperature rise 150°F/66°C above ambient, maximum outlet temperature 200°F

- Water output temperature is 190°-200°F (Excludes HSE-1002-SM10)

- Water output temperature for "wet" steam is approximately 250° (HSE-1002-SM10)

- Operates at 650 PSI in "wet" steam mode (HSE-1002-SM10)

- Easy coil drain

- Electric cord hanger

- Powder coated steel gun/wand holder

- Solid steel threaded axles

- Pneumatic tires with tubes (4)

- Locking tire brake

- 50 foot x 3/8 inch steel wire braided pressure hose with screw connects, swivel and bend restrictors

- Professional-grade insulated trigger gun with safety lock-off

- Adjustable pressure insulated dual lance with 15 degree fixed and detergent nozzles

One (1) year limited warranty on electric motor

Two (2) year limited parts and labor warranty

Three (3) year limited warranty on coil

Seven (7) year limited warranty on pump

- High quality fuel filter/water separator ensures clean fuel supply

- Energy efficient top-fired powder coated heat exchanger designed for convenient troubleshooting and easy maintenance

- Reinforced powder coated steel tube frame with center balanced lifting hook

- 35 foot power cord with in-line GFCI which meets required CSA certification

- Powder coated steel hose reel mounting bracket

* Combination Steam Cleaner/Pressure Washer

< Low Pressure Detergent Injection

Options

Auto start/stop (HX-0050 for HSE-1002/1502-0M10)
(HX-0051 for HSE-2003) - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart

Auto start/stop-steam (HX-0052 for HSE-1002; HX-0053 for HSE-1502)
(HX-0054 for HSE-2003) - Auto start/stop option-when trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart; Steam option-reduce pressure to 350 PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240 degrees F over ambient with a maximum of 300 degrees F.

Auto start/stop-CAD cell (HX-0055 for HSE-1002/1502-0M10)
(HX-0056 for HSE-2003) - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart; Cad cell option monitors burner for proper ignition

Auto start/stop-steam-CAD cell (HX-0057 for HSE-1002)
(HX-0058 for HSE-1502) (HX-0059 for HSE-2003) - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart; Steam option-reduce pressure to 350 PSI by adjusting unloader valve counter-clockwise, spray temperatures will rise 240 degrees F over ambient with a maximum of 300 degrees F; Cad cell option monitors burner for proper ignition

Hour meterr (HX-0161) - Displays number of hours unit has been in operation

Puncture-proof tires (TX-1004-W) - Tires are flat-free, maintenance-free, 10 inch, white hub, four tires