HG-2004-1208 - Belt Driven Hot Pressure Washer Natural Gas or LP

< hr>
PSI - 2000
GPM - 4.2
HP - 6.0
Volt/Phase/Amp 230V/1PH/25.5
< hr>
This stationary natural gas/LP unit offers the convenience of a steady fuel source - the perfect pressure washer solution for wash bays.

- Open drip-proof electric motor with thermal overload protection

- Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10 inch stack

- Factory preset trapping unloader

- Thermal relief valve

- Pressure switch and overpressure safety controls

- 24 volt controls system

- Polyethylene flaot tank (4 gallon with in-line screen filter)

- 1/2 inch schedule 80 coil with 7 pancake heat exchanger

- Adjustable thermostat

- Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option)

- Powder coated steel side panels and frame

- Quick connect nozzles (0°, 15°, 25° and 40°)

- 50 foot x 3/8 inch steel wire braided pressure hose with quick connects, swivel and bend restrictors

- Professional-grade insulated trigger gun with safety lock-off

- Adjustable pressure insulated dual lance with fixed detergent nozzle

One (1) year limited warranty on electric motor

Two (2) year limited parts and labor warranty

Three (3) year limited warranty on coil

Seven (7) year limited warranty on pump

- Belt drive triplex ceramic plunger General pump

- Adjustable high pressure detergent injection

- Electronic ignition with standing pilot light

- Draft diverter included

Options

Liquid propane (HX-0105) - Converts natural gas pressure washer to operate on liquid propane (vapor only)

Hour meter (HX-0106) - Displays number of hours unit has been in operation

Time delay shutdown (HX-0107) - Timer will shut unit off automatically when trigger gun is released and timer reaches setting

Remote station (1) (Auto start/stop N/A) (HX-0108) - Adds control box which may be mounted away from unit to control on/off, burner and soap injection

Additional remotes (HX-0110) - Additional remotes that may be added to unit after the 1st remote is installed

Time delay shutdown and first remote box (Kit option) (HX-0109) - Timer will shut unit off automatically when trigger gun is released and timer reaches setting; Adds control box which may be mounted away from unit to conrol on/off, burner, and soap injection

Auto start/stop (HX-0111) - When trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart

K7 unloader (Flow activated) (Auto start/stop N/A) (HX-0112 for HG-2004) (HX-0104 for HG-3004) - Converts pressure trapping unloader system to flow actuated K7 unloader. Pressure is not trapped in the discharge line when trigger is released

250°F steam upgrade (HX-0120 for HG-2004) (HX-0121 for HG-3004) - Steam option adjust unloader valve counter-clockwise increasing outlet temperature to 250 degrees F while lowering system pressure

Auto start/stop and first remote option (HX-0124) - Auto start/stop option - when trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart; Adds control box which may be mounted away from unit to control on/off, burner, and soap injection

NOTE: You cannot order HX-0107 and HX-0108 together; you will need to order HX-0109 instead. However, HX-0107 and HX-0108 may be ordered separately.